3.5.2.1.Serial Communication Settings

Serial Communication Settings

Serial Communication Settings

1

COM port

1. COM port
Select the COM (serial) port matching the PC port to which the device is connected.
 

2

Baud rate

2. Baud rate
Select the baud rate matching the serial settings of your device.
 

3

Data bits

3. Data bits
Select the number of data bits matching the serial settings of your device.
 

4

Parity

4. Parity
Select the parity according to the communications settings of your device.
 

5

Stop bits

5. Stop bits
Select the number of stop bits matching the serial settings of your device.

6

Receiving handshake

6. Receiving handshake
Select the receiving handshake based on the serial settings of your device.
 

7

Receiving DTR enabled check

7. Receiving DTR enabled check
Check the Data terminal ready settings of the device. If not sure, try without DTR and test if data is received.

8

Transmit handshake

8. Transmit handshake
Select the transmit handshake based on the serial settings of your device.
 

9

Transmit DTR enabled

9. Transmit DTR enabled
Check the Data terminal ready settings of the device. If not sure, try without DTR and test if data is received.
 
Yes No Suggest edit
Suggest Edit